Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
IMPORTANT: Unplug the vacuum before performing any maintenance.
EMPTYING THE DUST CUP
Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup
reaches the MAX fill line.
WAND
Press the wand release button and lift the handheld
vacuum off the wand.
s h a r kc l e a n . c o m
To remove the dust cup from the handheld vacuum,
squeeze the two Dust Cup Release buttons at the
same time and pull out the dust cup. Press the Empty
button on the front of the dust cup.
OR
Empty
With the dust cup attached to the handheld vacuum,
press the Empty button on the front of the dust cup.
MAINTENANCE
IMPORTANT: Unplug the vacuum before performing any maintenance.
CLEANING FILTERS
Regularly clean and replace the filters to keep your vacuum's suction power optimal.
IMPORTANT: To prevent damage, rinse filters with water ONLY. DO NOT use soap. Allow filters to air-dry for
at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.
PRE-MOTOR FILTERS
The Pre-Motor Filters should be washed
once a month.
REPLACEMENT FILTERS
Replacement Pre-Motor Filter Kit
XPMFK320
NOTE: The pre-motor filters should be
replaced every 2.5 years. The post-motor filter
should be replaced every 3 years.
POST-MOTOR FILTER
The Post-Motor Filter should be washed
once every year.
Replacement Post-Motor Filter
1084FTV320
s h a r kc l e a n . c o m
Publicité
