Publicité
Les langues disponibles
Les langues disponibles
(Click)
1. Insert Wand into Floor Nozzle.
2. Insert Handheld Vacuum into wand.
Ensure all connections click securely into place.
BRUSHROLL INDICATOR LIGHT
INDICATOR LIGHT
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green: The brushroll is spinning and working as it should.
Solid Red: There is a jam in the brushroll area. Turn your vacuum off and remove any blockages
in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn your vacuum off and wait a
minimum of 60 minutes for it to cool down.
s h a r kc l e a n . c o m
ASSEMBLY
1
(Click)
2
OFF
Slide switch to the bottom
to turn off power. To begin
vacuuming, slide switch to
the appropriate setting.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, Carpet.
NOTE: Select Carpet for stuck-on dust and debris.
UPRIGHT
To clean floors, step on floor nozzle
and tilt handheld vacuum back.
WAND
ABOVE-FLOOR HANDHELD
Press the Wand Release button to lift the
handheld vacuum off the wand. Great for
cleaning stairs and furniture.
NOTE: All accessories are compatible with both the wand and the handheld vacuum.
SETTINGS
SETTING I
Bare Floor/Small Area Rugs
Carpet
The brushroll spins slowly
The brushroll spins faster
to clean bare floors and
to pick up debris below
small area rugs.
the surface of your carpets.
CLEANING MODES
ABOVE-FLOOR WITH WAND
Detach the wand for more reach to clean
baseboards, ceiling fans, window sills, and other
hard-to-access areas. Stand the vacuum upright,
then step on the foot pedal of the floor nozzle and
pull the wand up to detach it.
SETTING II
s h a r kc l e a n . c o m
Publicité
