Sulzer CA 462 Guide D'installation page 10

Dimensions
4.2
Cleaning
4.3
How to clean the unit
Powers off the unit and only outside/front shall be cleaned by using a dry, soft cloth. A good choice would be
the microfiber type of cloth and gently wipe the CA 462 unit on front in order not to scratch the overlay. If the
dry cloth did not completely remove the dirt, do not press harder in an attempt to scrub it off. If necessary,
moisten the cloth by adding a small amount of water with thin solution of mild detergent and try again. Never
use detergent with polish or solvent which can have an impact of the plastic surface.
EN
70 mm
(2,76)
10
108 mm
(4,25)