Krick Florida Mode D'emploi page 40

Fig. centre hole for windscreen
Fix the disc in the centre and then drill the
remaining holes and tighten the disc with
screws 8.3.
Fig. windshield fixed in the centre
Fig. windscreen attachment points
Status April 2020
In the last step the cleats and small parts such
as tank cap and exhaust pipes are painted and
attached to the model.
Horn
Fig. bow view
Cleat
Exhaust pipe
Fig. rear view
Seite 18
Cleat
Tank nozzle
©
Krick Modelltechnik, Knittlingen, Germany