Widescreen Picture Format; Buttons On The Left Of The Tv; Turn The Tv On - Magnavox 52MF437S Manuel De L'utilisateur

_________________________

3.1 Widescreen picture format

Avoid black bars on the sides or on top and bottom of the picture.
Change the picture format to a format that fills the screen.
1. Press to switch on the Picture format menu.
FORMAT
2. Press Î or ï to select an available picture format.
3. Press Î to shift the picture upwards to make partly covered subtitles
visible.
Tip
The format Automatic is recommended for minimal distortion.
Automatic (Not for PC.)
Enlarges the picture automatically to fill the
screen. Subtitles remain visible.
Super zoom (Not for HD.)
Removes the black bars on the side of 4:3
broadcasts. There is a minimal distortion.
4:3 (Not for HD.)
Shows the classical 4:3 format.
Movie expand 14:9 (Not for HD.)
Scales classical 4:3 format to 14:9.
Movie expand 16:9 (Not for HD.)
Scales classical 4:3 format to 16:9.
Wide screen
Stretches 4:3 format to 16:9.
Unscaled (Only for HD and PC.)
Maximum sharpness. Distortion may appear on
borders. Black bars may appear with pictures
from your PC.
Note
Do not forget to name the connection in the Connections menu. See
chapter 7.5 Select your connections.
_________________________

3.2 Buttons on the left of the TV

Should your remote be lost or broken you can still change some of the
basic settings with the buttons on the left side of your TV.
. switch to turn the TV on.
Press the
POWER
The button can be used to summon or exit the TV menu
MENU
without the remote control.
Use the and buttons to adjust the volume.
VOLUME + -
Use the CHANNEL + and - buttons to browse through the TV channels
and sources stored and marked in the Favorite channel lists.
_________________________

3.3 Turn the TV on

Press the .
• POWER switch at the left side of the TV.
> An indicator on the front of the TV lights up.
• Press the + CH - button or the
control.
The first time (and only the first time) you turn on your TV, you
see a welcome screen followed by the installation procedure. See
Chapter 4 First time installation.
POWER button on the remote
7