Use Of The Remote Control - Magnavox 52MF437S Manuel De L'utilisateur

_________________________

3 Use of the remote control

2
5
9
11
16
Due to the sensitivity of the remote control, you may experience a
delayed operation at start up of the TV. After a short while your remote
control will work smoothly.
6
1
POWER
2
1 AV
3
3
4 FORMAT
4
6 CLOCK
5
7 DEMO
6 Color buttons
8
7
INFO
10
12
13
14
8
OK
15
9 MENU
10 Cursor buttons
11 VOLUME
12 Channel selection
13 MUTE
14 Numeric buttons
15 •
16 A/CH
Press to turn the TV on/off.
Press repeatedly to select ,
AV1 AV2
HDMI 2 , HDMI 3 , Side or TV channels according to
where you connected the accessory devices.
See Chapter 3.1 Widescreen picture format.
No function
Demo on/off.
When functions are attached to the color buttons, the
color buttons are shown on screen.
Display information: Press to display (when available)
information about the selected TV channel and program
or accessory device. The quality and accuracy of the
information on the information banner are transmitted
from broadcasters. You may see a difference in broadcast
time if the broadcaster is from a different time zone area.
Display clock: Select to activate/de-activate the clock
display on the screen.
- To activate a setting.
- To display the list of channels stored (according to the
selection made in the Installation mode - Antenna or
Cable, see Chapter 7.3 Store TV channels).
- Starts playing content in the Multimedia Browser
application. See Chapter 9 Multimedia browser.
Settings menu on/off. See Chapter 5.2 Use of the TV
menu settings.
Press the cursor buttons up/down, left/right to navigate
through the menus.
Press + or - to adjust the volume.
- To browse through the TV channels or sources stored
and marked in the selected Favorite channels list. See
Chapter 8 Create your favorite list;
- To quickly browse through the list in the menus;
- To select between Antenna or Cable TV channels, first
make your selection in the Installation menu, Channel
installation, Installation mode, see Chapter 7.3 Store TV
channels.
Interrupt the sound or restore it.
To select a TV channel.
Type the dot (•) for digital channels.
Press to alternate between the currently viewed channel
and the previously viewed channel.
, , ,
AV3 HDMI 1