6.1 Scanning for stations
The first time you select DAB radio mode, or if the station list is empty, DR 880
automatically performs a full scan to search for available stations.
Once the scan is complete, the radio shows a list of available stations
If you wish to do a DAB full scan later again, select Menu > Full Scan > OK. Please note
that the staion list (not the favorites) will be overwritten.
6.2 Selecting stations
To change a station, press q or p to scroll through the list of stations and press OK to
select. Once selected, the station plays and the screen shows information about the station,
track or show.
6.3 Preset a Station
DR 880 has 20 preset memories for DAB, In order to save a DAB station, press and hold
on the remote control or Menu > Preset store > OK on the device, then press ▲/▼ to
select the memory.
6.4 Preset recall
Press 1-6 or
on the remote control to recall the preferred station. You can also select
Menu > Preset Recall on the radio.
6.5 Manual Tune
As well as the normal method of scanning and selecting stations from a list, you can also
tune manually to a particular channel/frequency. To manually tune, select Menu > Manual
Tune and press q or p to select a particular channel/frequency.
6.6 DAB display information
While the DAB radio is playing, the display shows information of the current song. To view
further information, press INFO. Each time you press INFO, another set of information is
displayed, cycling through DLS text, signal strength, programme type, ensemble name,
channel number/frequency, signal error rate, bit rate/codec, time and date. Additionally
DAB+ is able to show slideshow pictures transmitted by the radio stations. In order to switch
between full screen and minimized view press Select.
English
21