Troubleshooting - Albrecht Audio DR 880 Guide D'utilisation

10. Troubleshooting

Error
The device does not switch on. 1.
No sound
Radio reception is poor
Alarm does not work
The function buttons do not
respond
26
Remedy
Check if the power adaptor is connected properly.
2. The device may malfunction when used in areas
with strong radio interference. The device will work
properly again once there is no more interference.
1. Turn on the sound as it may be muted
2. Increase the volume.
1. Check/move the FM antenna.
2. Move the radio to a different location.
3. Check that you do not have other electrical
equipment too close to your radio, causing
interference.
4. Visit www.digitalradio.de for information about
DAB reception in your area.
1. Switch on the alarm.
2. Due to the volume setting, refer to the solutions of
"No sound".
3. The source of alarm was set to a station that can't
be received. Change the source of alarm.
1. Check that the power supply is switched on. Press
and release the Power button on the radio.
2. Try a reset to factory defaults.
NOTE: All of your settings, including the radio
station list and any presets will be deleted when
you reset the Radio
English