8. Aux in mode
Aux in mode plays audio from an external source such as an MP3 player, mobile phone, etc.
To play audio with Aux in mode:
•
Turn the volume low on at the audio source device.
•
Connect the external audio source to the LINE-IN 3.5mm stereo socket.
•
Press MODE > AUX > OK.
•
Adjust the volume at the audio source device as required.
Note: You can't adjust or mute the volume on the DR880, only on the external source
9. System Settings
Press MENU > System Settings > OK select between Equalizer, Backlight, Time/Date,
Alarm, Sleep, Factory Reset, Info or Language.
9.1 Equalizer
Default Equalizer is Rock, you may change to Normal, Classic, Pop or Jazz.
9.2 Backlight
Configure the backlight brightness of the display.
If you select Power Saving you can select the level to which the display is dimmed down
when the radio enters the Standby mode or when the radio gets no key input for 15, 20,
30,45, 60, 90, 120 or 180 seconds (Timeout).
The On options keeps the display always illuminated. You can adjust the Timeout (no key
input) and Brightness (Level) in three steps (High, Medium, Low).
The brightness-levels are also selectable with the LIGHT button on the remote control.
9.3 Time/Date setup
Set Time/Date- Press p/q to adjust and ◄/► to move between the digits and press OK to
confirm.
Set Format- Chose time format display as 12 Hour or 24 Hour (default) and press OK to
confirm.
Set Update- Chose the update source: Update from DAB, Update from FM or No Update
and press OK to confirm.
9.4 Alarm
Alarm1 and Alarm2 are two independent alarms.
Choose Alarm 1 or 2 and press the OK button to select. Use p/q to choose between:
Alarm-Mode, Alarm-Time, Alarm-Sound, Alarm-Volume and press OK to confirm. Press
p/q to adjust the mode, time, sound and volume settings, press ◄/► to move between the
digits.
24
English