3.3. Antenna
The F-connector antenna has already been installed on the device. To get good reception for DAB/
FM broadcasting, always extend the antenna with its full length.
3.4. System Menu and Settings
At any operation mode, press and hold MENU/INFO button to enter system menu in order to
change device configurations. Rotate the <TUNING /SELECT> control to select the submenu and
then press the <TUNING /SELECT> control to confirm.
4. DAB+ Radio Operation
Caution: Before listening to the radio, ensure that the DAB/FM Antenna is correctly connected and
adjusted with proper length and direction.
The icon on the top right corner of the display shows the strength of the DAB/DAB+ signal detected
by the device.
4.1. Scanning to DAB+ stations
Auto scanning: Press and hold MENU/INFO button to go to system menu where you can select
SCAN to run the operation. All stations are put on the Station List after scanning.
5. FM Radio Operation
Caution: Before listening to the radio, ensure that the DAB/FM Antenna is correctly connected and
adjusted with proper length and direction.
The icon on the top right corner of the display shows the strength of the FM signal detected by the
device.
5.1. Scanning to FM stations
Rotate <TUNING /SELECT> control to make tuning with 0.05MHz per step
English
13