Rowenta INTENSE AQUA CONTROL HU5120 Manuel D'instructions page 6

EN
• Do not allow the area around the appliance to become humid or damp. Should this happen, you
should reduce the humidifying speed or turn the appliance off.
• Never allow absorbent materials such as carpet, curtains, or tablecloths to become humid or damp...
• If the appliance is to be left unattended for a prolonged period of time: it is important to turn it off, un-
plug it, empty the water tank and the vaporisation compartment, then clean and allow the appliance to dry.
• Clean the appliance before and after storage.
• Regular cleaning of the appliance is recommended; approximately every 1-2 weeks (depending on use).
• WARNING : Micro-organisms can grow in the water tank and be blown in the air when the water tank
is not cleaned regularly and properly (see MAINTENANCE paragraph).
This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and (2) this device must accept any interference recei-
ved, including interference that may cause undesired operation.
STARTING THE APPLIANCE
Before using the appliance for the first time, check that your main supply voltage matches that indi-
cated on the appliance.
Before switching on your appliance make sure that:
• the appliance is positioned in accordance with these instructions,
• the appliance is on a flat and stable horizontal surface which is not sensitive to humidity and at
least 20cm from any other object,
• the intake grills located under the appliance are totally unobstructed.
How to use your appliance:
1. Lift the water tank, remove the adjustable nozzle (3) and unscrew the demineralization cartridge
holder stopper (7).
2. Clean the tank (see paragraph CLEANING) and fill it with clean, cool tap water (minimum 2 litres
[0,5 gallon] / maximum 5.5 litres [1.5 gallons]).
PLEASE NOTE: We advise you to use preferably distilled water if you live in a hard water area, or if
white dust accumulates around the product despite the use of the anti-calc cartridge.
3. Tighten the stopper and check that there are no water leaks.
4. Check that the base of the appliance is clean and that there are no foreign objects.
5. Check that the water level sensor is not obstructed.
6. Reposition the tank on the base.
7. Adjust the nozzle so that the vapor jet is not directed at an obstacle, which could adversely affect
the humidity regulation.
8. Wait for ten or so minutes for the water to pass through the demineralization cartridge and fill the
vaporisation compartment.
9. Plug the appliance in.
10. Turn the appliance on.
20cm 20cm
5,5L
[1.5 gal]
max
6