Publicité
Les langues disponibles
Les langues disponibles
ACCESSORIES USED:
(j)
• Fruit juicer assembly
(b3)
• Bowl
.
FITTING THE ACCESSORIES:
(b3)
• Fit the bowl
onto the motor unit
(j2)
• Slide the drive pin
(j3)
• Place the basket
onto the bowl and lock it in place.
(j1)
• Fit the cone
onto the basket funnel
• To remove the fruit juicer assembly: release the basket
assembly from the motor unit.
STARTING AND TIPS:
• Cut the fruit in half and hold in place on the cone (j1).
• Turn the speed selector (a3) to position 1 to start.
You can get up to 0.6l of fruit juice without emptying the bowl.
• Caution: you must rinse the basket every 0.2l.
8 : Storage of the accessories
• Your food processor has a built-in storage drawer
4 vegetable cutter inserts
• After putting the accessories inside, slide the storage drawer
9 : Finely chopping small quantities (depending
on model)
ACCESSORIES USED:
• Chopping assembly.
• Finely chop in seconds: dry apricots, dry figs, cored prunes:
quantity/maximum time: 40g/6 seconds.
Cleaning
• Unplug the appliance.
• To make cleaning easier, rinse the accessories each time after use.
• Wash and dry the accessories: they are dishwasher proof.
• Pour hot water with a few drops of washing up liquid into the blender jug
(h1)
measuring cap
fitted. Press the pulse button a few times. Unplug the appliance. Rinse the jug.
• Do not immerse the motor unit
• The blades of the accessories are very sharp. Handle them with precaution.
Tip: If your accessories are stained by food (carrots, oranges...), wipe them with a cloth soaked with cooking oil,
then clean as usual.
7 : Juice fruits (depending on model)
.
(a)
and lock it in place.
onto the motor unit drive
(j3)
.
(f)
.
(a)
in water, or place it under running water. Wipe it with a damp sponge.
(a1)
.
(j3)
then the bowl and you can then remove the
(i)
where you can place the multi-purpose blade
(i)
inside the motor unit
33
(d)
(a)
.
(h3)
(h2)
. Close the lid
, with the
GB
, and the
Publicité
