Publicité
Les langues disponibles
Les langues disponibles
3 : Mixing/chopping/kneading
ACCESSORIES USED:
(b)
• Bowl assembly
.
(c)
• Drive pin
.
(d)
• Multi-purpose blade
FITTING THE ACCESSORIES:
(b3)
• Fit the bowl
onto the motor unit
• Slide the multi-purpose blade
(a1)
.
• Place the ingredients in the bowl.
• Fit the lid (b2) and lock it onto the bowl
• To remove the bowl-lid assembly: release the lid then release the bowl.
KNEADING/MIXING:
• Turn the speed selector
You can knead up to:
- 600g of heavy pastry, such as: white bread dough, short crust pastry, etc. in 30 seconds.
- 500g of special bread dough such as: rye bread, wholemeal bread, multi-grain bread, etc. in 30 seconds.
You can mix up to:
- 600g of light mixture, such as: biscuits, sponge cake, etc. in 1 min 30 sec.
You can also mix up to 0.5 litre of pancake or waffle batter etc. in 1 min to 1 min 30.
CHOPPING:
• Turn the speed selector
You can mince up to 300 g of food such as:
. raw or cooked meat (boned, gristle removed and cut into cubes).
. raw and cooked fish (without skin or bones).
. hard foods: cheese, dried fruits, certain vegetables (carrots, celery, etc.).
. soft foods: certain vegetables (onions, spinach...).
BLENDING:
• Turn the speed selector
You can mix up to 0.5 litre of broth, soup or stewed fruit in 20 seconds.
ACCESSORIES USED:
(b)
• Bowl assembly
.
(c)
• Drive pin
.
(f)
• Appropriate insert
(depending on model).
(g)
• Insert support
.
FITTING THE ACCESSORIES:
(b3)
• Fit the bowl
onto the motor unit
(f)
• Fit the chosen insert
(f)
, and lock the assembly, then fit it onto motor unit drive
(b2)
• Fit the lid
and lock it onto the bowl
• To remove the bowl-lid assembly: release the lid, then release the bowl.
STARTING AND TIPS:
• Insert the food into the lid funnel and guide it with the food pusher
• Turn the speed selector
You can prepare with the inserts (depending on model):
(C)
. coarse grating
/fine grating
(H)
. thick slicing
/fine slicing
(E)
. chip cutter
: French fries...
(G)
. parmesan disk
: parmesan, coconut...
.
(a)
and lock it in place.
(d)
onto the drive pin
(b3)
.
(a3)
to position 2 to start.
(a3)
to position 2 to start, or for better chopping control, choose the pulse position.
(a3)
to position 2 to start.
(a)
and lock it in place.
(g)
into the insert support
(b3)
.
(a3)
to position 1 to slice or position 2 to grate.
(A)
: celeriac, potatoes, carrots, cheese...
(D)
: potatoes, onions, cucumbers, beetroot, apples, carrots, cabbage...
(c)
, and position this assembly on the motor unit drive
4 : Grating/slicing
(c)
, push the drive pin
as far as possible through the insert
(a1)
.
(b1)
.
31
GB
Publicité
