TEFAL STORE'INN DO222F66 Mode D'emploi page 15

Description
a
Motor unit
a1 : Motor unit slow speed
a2 : Motor unit fast speed
a3 : Speed selector: Pulse position
(intermittent operation) -0-1-2
ACCESSORIES DEPENDING ON MODEL:
GB
d
Multi-purpose blade
e
Emulsifying disk
f
Vegetable cutter inserts
A : Fine grater
D : Fine slicer
C : Coarse grater
G : Pamesan grater
H : Thick slicer
E : Chip cutter
g
Insert supports for vegetable cutter inserts
h
Blender jug
h1 : Measuring cap
h2 : Lid
h3 : Bowl
First use
• Before using for the first time, wash all parts of the accessories in hot soapy water (see cleaning paragraph).
Rinse and dry.
• Place the motor unit
• Plug in your appliance.
• Pulse (intermittent operation): turn the knob
of certain preparations.
• Continuous operation: turn the knob
• Stop: turn the knob
The paragraphs are numbered to match the numbering of the illustrations.
1 : Fitting the chopping bowl and the lid
ACCESSORIES USED:
(b)
• Bowl assembly
FITTING THE ACCESSORIES:
(b3)
• Fit the bowl
(b3)
• Lock the bowl
• Fit the lid (b2) onto the bowl
The bowl must be locked onto the motor unit (a) before locking the lid
• Release the lid by turning it in a clockwise direction to free it from the bowl handle. You can then lift and
remove it.
• Release the bowl by turning it in a clockwise direction.
• It is only now that you can lift and remove the bowl from the motor unit.
(a)
on a flat, clean and dry surface.
(a3)
(a3)
to position 0.
.
(a)
onto the motor unit , with the bowl handle positioned slightly to the right of the knob.
by turning it towards the right.
(b3)
. Lock the lid in place by pushing it towards the right of the bowl handle.
2 : Removing the chopping bowl and the lid
b
Chopping bowl assembly
b1 : Food pusher with measuring guide
b2 : Funnel lid
b3 : Bowl
c
Drive pin
i
Storage drawer
j
Fruit juicer
j1 : Cone
j2 : Fruit juicer drive pin
j3 : Basket
k
Spatula
l
Blender stick
(a3)
to the pulse position, pressing successively for better control
to position 1 or 2.
30
(b2) (b3)
onto the bowl .