Black & Decker FS1610R Mode D'emploi page 6

ENGLISH
•
Secure the fan blade on to the motor shaft by
re-fitting the blade cap. Tighten the blade cap
by turning it anti-clockwise.
•
Place the front guard onto the rear guard by
positioning the top clip on the uppermost part
of the rear guard. Push the top clip down and
press the rim of the front guard onto the rear
guard ensuring a tight fit all the way round.
•
Close the bottom clip. Tighten the bottom clip
screw by turning it clockwise.
Use
Warning! Never use the fan without the guard in
place or if the guard is damaged.
Note: All controls can be operated from the fan
unit or from the remote control.
6
Switching on and off
Your Fan has four speed control to keep the
desired air flow through your room.
Symbol Speed
M Medium
H High
AUTO/L Pulse
AUTO/L Low
•
To switch on, press the ON/SPEED button the
required number of times to set the desired
speed. The fan will start.
AUTO/L M H
•
To switch off, press the OFF button.
Press Button
1 time
2 times
3 times
4 times