M.-Nr. 11655860
en
Fitting instructions for fluff filter box APWM900
Included parts
No.
Mat. no.
Designation
1
Filter casing
1
Fluff filter
1
Lid
2
Holding plate
8
M6 nut
8
8.4 washer
1
DN 70 connection
1
"Caution hot surface" sticker
The "Miele Service Documentation (MSD)" service application is required when carrying out maintenance work
on the appliance
The safety instructions and warnings in the Miele Service Documentation (MSD) for the corresponding model must be
observed.
Work on the appliance must be carried out in accordance with the work instructions.
Danger due to incorrect service and repair work
WARNING
Danger due to incorrect service and repair work.
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A
Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A
All appropriate safety requirements must be taken into account.
A
Wear personal protective equipment.
A
First read the Miele service documentation, then commence work.
Risk of scalding when carrying out service and repair work
WARNING
Risk of scalding when carrying out service and repair work.
The fluff filter box may contain hot water. When carrying out service and repair work, contact with hot water can
cause scalding.
A
Drain the water from the fluff filter box before commencing service and repair work.
Risk of burns when carrying out service and repair work
WARNING
Risk of burns when carrying out service and repair work.
Contact with hot surfaces causes burns.
A
Before commencing service and repair work, check that the surfaces have cooled.
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
4 von 37
12.02.2021