Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONTENTS | SPECIAL INFORMATION
SPECIAL INFORMATION
OPERATION
1.
General information �����������������������������������������2
2.
Package contents & parts list �������������������������������2
2.1
Key components parts list ������������������������������������� 3
3.
Operating conditions ����������������������������������������3
4.
General information �����������������������������������������4
5.
Required supplies ��������������������������������������������4
6.
Installation ����������������������������������������������������4
6.1
Select an installation location. �������������������������������� 4
6.2
Shut off main water supply and drain pipes. �������������� 4
6.3
Cut into existing main water line ����������������������������� 4
6.4
Mount on wall ���������������������������������������������������� 4
6.5
Connect to existing plumbing ��������������������������������� 5
6.6
Open filter cartridge �������������������������������������������� 5
6.7
Turn on the water ������������������������������������������������ 5
7.
After installation ���������������������������������������������5
7.1
Water heaters����������������������������������������������������� 5
7.2
Dishwashers ������������������������������������������������������ 6
7.3
Glass shower doors ��������������������������������������������� 6
8.
Maintenance ��������������������������������������������������6
8.1
Obtaining replacement filter cartridges ��������������������� 6
8.2
Filter cartridge replacement procedure ��������������������� 6
9.
Data table �����������������������������������������������������6
10.
Warranty ������������������������������������������������������7
SPECIAL INFORMATION
Important Notes:
- Please read this manual carefully before attempt-
ing installation. Failure to follow these instruc-
tions may void your warranty, cause injury, or
result in property damage.
- The housing sump should be replaced every 10
years or if you notice any cracks or damage.
- This filter system should not be used with water
that is microbiologically unsafe or of unknown
quality without adequate disinfection before and/
or after the system.
- Water filter systems should never be exposed to
freezing temperatures - severe damage to the fil-
ter and housings could result. Such damage is not
covered under any warranty.
- After prolonged periods of non-use (such as a
vacation), it is recommended that the system be
flushed thoroughly for at least 5-10 minutes be-
fore using the water.
2
| Scale TAC-ler
OPERATION
1.
General information
Thank you for your purchase of your Scale TAC-ler Series Salt-Free
Hard Water Conditioner. You have purchased one of the finest hard
water treatment systems on the market today. Scale TAC-ler uses
the latest in salt-free hard water conditioning media technology
to reduce or eliminate hard water mineral scale in tankless water
heaters. Scale TAC-ler is an environmentally-friendly alternative
to conventional water softeners to prevent the formation of hard
water scale in your plumbing system, water treatment equipment,
water heater, dishwasher, and more.
This manual is designed to provide owners, installers, and service
technicians with detailed information about the installation, start-
up, and operation of your new water treatment system.
The heart of your Scale TAC-ler system is its highly-specialized
Template Assisted Crystalization (TAC) media. To ensure optimal
performance and life of your TAC media, it is important that these
instructions be followed and that the system is operated within the
technical specifications provided. Your warranty may be voided
if you fail to follow these instructions and/or fail to operate your
treatment device within the guidelines noted.
Your Scale TAC-ler water treatment system is designed to offer low
maintenance operation. The Scale TAC-ler filter cartridge will need
to be replaced roughly every 2 years. As the TAC media is the most
critical component to the success of your Scale TAC-ler system,
we strongly recommend that only authentic Stiebel Eltron Scale
TAC-ler Series filter cartridges be used to replace your cartridges.
NOTE:
Read these instructions carefully before using the ap-
pliance and keep them for future reference.
Pass on the instructions to a new user if required.
2.
Package contents & parts list
The Scale TAC-ler arrives with the following parts included:
f one heavy-duty filter housing with ¾˝ NPT fittings, inlet and
outlet shut-offs and pressure relief button
f one mounting bracket and related lag bolts (4), pan-head
screws (4) and washers (8)
f one Scale TAC-ler filter cartridge (shipped inside housing -
remove protective wrap before using)
f one spanner wrench
www.stiebel-eltron-usa.com
Publicité
Chapitres
Table des Matières
