Franklin Electric VR Spec PAK Manuel Du Propriétaire page 12

DRIVE CONFIGURATION
Master VFD Control HMI Menu Settings
System/Project Info Screen
To navigate to this screen, refer to
1. Change Password button: validates and alters the new passcode entered. Refer to
on page 12 to change the system passcode.
2. Project Info button: displays a screen with customizable information provided at the time of purchase.
• Screen headings include "Project Information" and "Spare Parts".
3. "Press until Calibrate Screen appears" button: refer to
System Passcode
• When accessing any of the setup screens, a passcode screen will appear.
• The factory preset passcode is "0" (zero).
• For security purposes, the value shown in the "Passcode" field always displays as "0" and does not rep-
resent the actual value.
To update the system passcode:
1. Press the display field to the right of the "Current Pass-
code" text label to bring up the "Passcode Change"
input screen.
2. Enter the current passcode on the input screen that
appears.
3. Hit the return key.
4. Press the display field to the right of the "New Pass-
code" text lable to bring up the "New Passcode" screen.
5. Enter the new passcode on the input screen.
Hit the return key.
• Refer to step 3 and the graphic.
6. Press the Change Password button on the System/
Project Info screen.
NOTE: The new passcode is accepted if the values in
both fields return to "0" on the screen.
12
"Master VFD Control HMI Main Screen" on page
"Calibrate Screen" on page
8.
1
2
3
"System Passcode"
13.
1
4
6
3