Philips HQ6894 Mode D'emploi page 9

1
C
2
3
Do not connect the shaver to the mains again
after the batteries have been removed.
Troubleshooting
1
Cause 1: the shaving heads are dirty.
B
The shaver has not been rinsed long enough or
B
the water used was not hot enough.
Clean the shaver thoroughly before you
continue shaving (see 'Cleaning').
2
Cause 2: long hairs are obstructing the shaving
B
heads.
1
C
Remove the retaining frame.
Remove the hairs with the brush supplied.
C
Clean the cutters and guards.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
Remove the mains plug from the socket
and pull the appliance plug out of the
shaver.
Let the shaver run until it stops, undo the
screws and open the shaver.
Remove the batteries.
Reduced shaving performance
ENGLISH
11