Philips HQ6894 Mode D'emploi page 2

ENGLISH
4
C
C
C
C
C
Important
Only use the HQ8000/ 6000 powerplug
supplied to charge the appliance.
The powerplug transforms 110-240 volts to
12 volts.
Make sure the HQ8000/ 6000 powerplug
does not get wet.
The shaver runs at a safe low voltage of
12 volts. It is watertight and can be cleaned
under the tap. Do not rinse with water hotter
than 80cC.
The display
The display provides the following information:
Charging
As soon as you connect the cord, the light in the
display goes on, the plug symbol appears and the
minute indication starts blinking.
Batteries fully charged
When the batteries have been fully charged, the
word 'FULL' runs across the display and the light
in the display starts blinking.
Remaining shaving time
The number on the display shows the remaining
shaving time in minutes.The segments indicate
how much energy there is still left in the batteries.
The shaving time of a fully charged shaver will
range from 55 to 70 minutes, depending on your