Alarm Modes - Luda Elektronik horseAlarm Guide D'utilisation

12. Alarm Modes

All horses are different and sometimes you will need to change the alarm function on horseAlarm.
For example, in hot condition you may need to rely on the position alarm only.
Press the B button to switch between the following modes:
Alarm off
Sweat
The receiver
Will alarm when
will not blink
the horse is
or sound at
sweating more
all.
than the set
limit.Read the S
paragraph.
Sweat Settings
Press the A button to increase the alarm limit for sweating. After reaching the maximum level of 15
it will jump down to 1.
Position Settings
Normally the mare is not sleeping flat on her side at the end of the pregnancy. Thus we can detect
when she is lying down flat and assume that the foaling has begun. For normal foaling cases we
recommend that you use setting A.
Press the B button for a few seconds to switch between the different position settings. Release
when your chosen setting is visible on the screen. You can choose between the following:
– The position alarm will alarm if the horse is laying down for more than 7 seconds. A contrac-
tion lasts for at least 7 seconds. If the horse is lying down for less than 7 seconds the alarm will
not go off.
– For horses with colic or that are ill in other ways. The alarm will trigger immediately (2 sec)
after the horse lies down.
INFoRMAtIoN
To save battery life, the information is only transmitted every 20th second. The
alarm will still alarm according to the descriptions for A and C above, as data is
recorded every two seconds. The data recorded during the last 20 seconds is
transmitted as a "package" and then interpreted by the receiver.
Position Sweat or position
Will alarm if The default
the horse is setting.
lying down for
Read both
a certain time.
the S and P
Read the P
paragraphs.
paragraph.
- 41 -
Sweat & Position
Will need both
sweating and
position to
exceed their
levels to alarm.
Read the S and P
paragraph.
DE
EN
FR