Play SAFE THREE Instructions page 11

• Never leave the child alone in the seat at any time.
• Remember that you are responsible for the child's safety.
INSTRUCTIONS FOR USE
Installing the Safe Three in the vehicleo
• Place the Safe Three on the vehicle seat making sure that it is pressed
firmly against the backrest of the vehicle seat (fig.1).
• Place the child in the Safe Three (fig.2), making sure that his back is resting
against the backrest of the vehicle seat.
• Pull the seat belt. The abdominal part should go under both armrests and
over the child's legs (fig.3). The diagonal part of the vehicle seat belt on
the side with the buckle, should go over the armrests (fig.4). Fasten the
buckle.
• Tighten the seat belt, without squashing the child, making sure that no
section of the belt is twisted.
• To release the child, simply unfasten the seat belt and take it off.
Removing the upholstery
• The upholstery of the Safe Three can be taken off for washing. Follow the
washing instructions printed on the care labels sewn onto the upholstery.
• Take care when removing the upholstery. Follow the instructions in reverse
order to fit each one of the components back on again.
WARNING: Never use the SAFE THREE without its upholstery.
Maintenance
• Follow the washing instructions printed on the different fabric care labels.
• The plastic parts can be cleaned with a soapy solution, do not use abrasive
products.
9