Blumfeldt 10032516 Mode D'emploi page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
16
Place the heater on a firm, level ceiling surface;
The Hook on the ceiling hanging the Patio Heater must be able to
undertake a weight 3 or 4 times that of the Patio Heater itself.
Never fix or place heater near flammable or combustible materials.
Generally heaters must be placed at a safe distance (clear space) of at least
2.0 m from combustible materials and glass walls. If installed in workshops
or garages where inflammable or combustible paints are used, the heaters
must be installed at a distance of at least 4.0 m from the source of danger.
If the heaters are placed in areas where spray painting of any description is
taking place, they should not be used during the painting operations.
Never use the heater in particularly dusty and explosive areas.
OPERATION
Connect the power cable to a 13 amp supply which is located in a safe, dry
area.
To operate the heater on 1 000W power, pull the Switch Cord once.
To operate the heater on 2500W power, pull the Switch Cord twice.
To off the heater, pull the Switch Cord third time.
Although the patio heater is waterproof, do not use when raining or in wet
conditions.
Never connect the power cable from the electrical supply, when the patio
heater is not in use.
When disconnected from the electrical supply, clean the surface of the
patio heater with a damp cloth. Never use corrosive or solvent cleaners or
immerse in water.
Any maintenance or repairs including replacing the halogen tube should
only be carried out by a qualified electrician or by a recommended service
center.

Publicité

Table des Matières
loading

Table des Matières