Blumfeldt 10032516 Mode D'emploi page 15

USE AND OPERATION
Unpack the halogen heater making sure that all the items are present and that
there are no components left in the box and that the heater head is free from
any packing material.
Connection to 220-240 Volts Power Supply
• It is important to ensure that the electricity supply is of adequate capacity
for the electrical load required by the appliance being installed.
• These appliances must be earthed.
Mounting
The heater is built with the best quality components in accordance to the
prevailing legal regulations and certified for safety in use. For best results
from the appliance please ensure that the installation is done by a qualified
electrician in accordance with the following instructions and taking full
account of current regulations. When using the heater, please carefully follow
the instructions and recommendations.
Installation to Ceiling
Minimum required
distances:
• 250 mm from the side
wall
• Minimum 500 mm from
the ceiling
• Installation height
above 1.8 m
EN
15