CHAMPBELL HAUSFELD Easy Spray Serie Instructions D'utilisation Et Manuel De Pièces page 7

Operation (Con't)
time, but allows you to be a little
sloppy during the painting portion, or
turn the air flow and material down
to make as small a pattern as you can.
Any overspray can be removed with a
razor blade or scraper. With this
method, practice definitely makes
perfect.
BASEBOARDS
For the baseboards, you only need to
shield against the flooring. It is impor-
tant to vacuum or sweep around the
baseboards so that carper fibers and
dust don't find their way into your
paint job.
The most comfortable way to spray
baseboards is the set the pattern con-
trol to the horizontal position and
hold the gun
on its side as
you work your
way around the
baseboard.
Turn the gun so that the top is
toward the adjoining wall when you
are spraying corners. CAUTION:
When cleaning the gun, pay special
attention to the hollow screws under
the check valve (shown in
Replacement Parts Diagram).
Holding gun sideways or upside down
can allow small amounts of paint to
clog the air passages.
WALLS
When you're ready to paint your
walls, two coats of paint are recom-
mended. Overlap each stroke by 1/2"
to 1/3" use the Easy Shield to protect
around the corners of your window
trim and door frames.
ACCESSORIES
The Easy Spray Gun can be used with
excellent results on furniture, shelves,
=
Horizontal Position
Operating Instructions & Parts Manual
picture frames and other small items
used to accessorize a room. While
trim color is still in the gun, paint
some of these items to give your
room a polished, coordinated look.
PAINTING CABINET DOORS
Lay the removed cabinet doors flat
on the floor or level surface or prop
against a sturdy object in a dust-free
environment. Be sure to protect sur-
rounding areas from overspray. Begin
by spraying any recessed grooves and
edges. Start at one corner of the
groove, spraying around the cabinet's
perimeter at a distance of 6" to 8".
After the grooves have been sprayed,
paint the rest of the surface using the
side-to-side method. Paint should dry
for 24 hours before painting the
reverse sides.
Spraying cabinet doors
Spraying cabinet doors can be quicker
and use less space if you construct a
spraying rack for this task. This needs
to be nothing fancier than a frame of
2x4s and some metal hooks. Suspend
the doors by the hooks leaving
enough space to spray both sides and
all edges.
PAINTING DRAWERS
Paint drawer fronts the same way you
would paint cabinet doors. Be careful
not paint any part of the drawer
track or slide. This will prevent
smooth operation.
7
www.chpower.com