CHAMPBELL HAUSFELD Easy Spray Serie Instructions D'utilisation Et Manuel De Pièces page 3

Set-Up (Continued)
2. Pour paint into cup.
3. Insert viscosity stick into paint and
stir. Lift stick out and compare
drip to Figures A, B & C.
NO NO
Viscosity
Stick
Paint
A
When paint drips from stick as
shown in C, approximately 1 drip
per second, paint is correctly
thinned.
Needle/Nozzle identification and Needle Size/Material Usage
White
Black
Gray
Paint Can
Paint Can
Paint Can
Canister
Canister
Canister
YES
B C
Thin (included with some models)
(1) Groove Ring
(1) Groove Ring
All-Purpose (Installed on all models)
(3) Groove Rings
(3) Groove Rings
Thick (Optional Accessory)
(2) Groove Rings
(2) Groove Rings
Operating Instructions & Parts Manual
4. Check cup
seal on
inside of lid
and make
sure check
valve is
installed as
shown.
5. Screw cup
onto gun.
NEEDLE/NOZZLE INSTALLATION (IF
NEEDED)
Note: After selecting correct needle
and nozzle for painting use, store
unused needle/nozzle in storage area
of turbine
Stains
Polyurethanes
Sealers
Dyes
Latex
Enamels
Glazes
Acrylics
Oil-based Interior Paint
Primers
Heavy Latex
Oil-Based Exterior Paint
3
Check Valve
Seal
www.chpower.com