General Safety Information; Setup - CHAMPBELL HAUSFELD Easy Spray Serie Instructions D'utilisation Et Manuel De Pièces

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Instructions & Parts Manual
General Safety
(Continued)
WARNING
!
ardous situation which, if not avoid-
ed, COULD result in death or serious
injury.
CAUTION
!
ardous situation which, if not avoided,
MAY result in minor or moderate injury.
NOTICE
tion, that if not followed, may cause
damage to equipment.
Read all instructions and safety
precautions before operating
the unit.
WARNING
!
Risk of fire or explosion!
Solvent and paint fumes can
explode or ignite, causing severe injury
and property damage.
Do not use to spray HALOGENATED
HYDROCARBONS. Paints and solvents
containing halogenated hydrocarbons
can react explosively with aluminum.
Always check the product's label before
using these materials in the unit.
Unit is not intended for spraying flam-
mable materials.
Make sure the room is well-ventilated.
Avoid all ignition sources, such as static
electricity sparks, open flames, hot
objects, sparks from connecting and dis-
connecting power cords, and working
light switches.
Follow the material and solvent manu-
facturers' safety precautions and warn-
ings. Do not use liquids with flash
points less than 100˚ F (38˚ C).
Do not carry TURBINE while spraying.
Keep the turbine at maximum distance
from spraying area.
www.chpower.com
Warning indicates
a potentially haz-
Caution indicates a
potentially haz-
Notice indicates
important informa-
MANUAL
Static electricity can be produced by
HVLP spraying. Make sure any electrically
conductive object being sprayed is
grounded to prevent static sparking. The
sprayer is grounded through the electric
cord. If an extension cord is necessary,
the cord must be a grounded, 115 volt,
three wire type cord.
Hazardous vapors: Paints, solvents, insec-
ticides, and other materials may be
harmful if inhaled causing severe nau-
sea, fainting or poisoning.
Always wear a mask or respira-
tor and eye protection when
painting. Be certain mask or
respirator will provide neces-
sary protection against inhalation of
harmful vapors.
NEVER point spray gun at any part of the
body or at anyone else.
CAUTION
!
Tipping gun may cause clogs. Dried spray
material also clogs pressure delivery
tube and fittings. The spray gun will not
function when clogged.
When not in use, be sure to disconnect
hose and place gun on a solid, level sur-
face, or in the gun storage area located
in the housing, to avoid tipping
Set-Up
SPRAY GUN COMES ASSEMBLED
1. Unscrew
cup
2

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Easy spray guns

Table des Matières