Sauna Heaters Installation - Helo RING WALL STJ Manuel Produit

Product Manual Ring Wall STJ

3.2.1 Sauna heaters installation

1. Prepare installation holes for the heater wall mount,
Note the necessary safety distance, see table 1 on page 9.
Screw in the upper bolts, leave the head ca. 2mm off the wall.
The lower bolts are installed and tightened at the end.
2. Turn the heater upside down. The installation holes (4x) for the wall
mounts are located in the bottom plate, see the arrows.
3. Install the heater wall mounts with the included
4,2 x 32mm screws (4x), as per the image.
Install the heater on the wall.
4. Install the lower wall mount bolts.
Tighten the upper bolts also.
8