Pro-User BRILJANT Notice D'assemblage Et De Sécurité page 33

Step 2
Parts:
Assembly:
The light frame is a loose part of the bike carrier that can be mounted on the far
ends of the unfolded arms. However, it must be assembled first.
Slide the two rear light holders (incl. lights) onto the light holder rail (make sure
that the lamp with an "R" on it is mounted on the right side) and fasten them
with the two plastic knobs.
Loosen and remove the little screws intended for the mounting of the number
plate holder from the light holder rail and fasten the number plate holder to the
rail. The number plate holder has to be level with the lighting.
End result:
33