Bottom Cabinet Shelf #10 - Louisiana Grills LG800ELITE Instructions Et Utilisation

ASSEMBLING THE CART KIT
Step 3 Attach rear cabinet wall
The vented rear cabinet panel, #15, is pre-drilled with four (4)
holes to match the hole pattern found on the legs. The
finished face should face outwards and should be flush to the legs.

Hand start each of the four (4) screws (BB) through the
panel and into each leg.

Using a Phillips head driver, firmly secure each screw.
Step 4 Attach the bottom cabinet door
stopper
This 90 degree metal bracket has the bottom plate with a metal
wedge, #12.
This wedge is designed to lift, straighten and aid in securing the
cabinet doors.

Line up the bracket, #12 with the two (2) holes found in the

bottom cabinet shelf #10.


Hand start each of the two (2) screws (BB) through the
bracket and into the shelf.

Using a Phillips head driver, firmly secure each screw.
ASSEMBLING THE CART KIT AND COOKING CABINET
Parts Required:
1 x Assembled Bottom Cart
1 x Upper Cooking Cabinet
2 x #27 Lifting Handles
16 X Screws (AA)
Tools Required:
Large Phillips Screwdriver or
Phillips Drive Bit and Drill
Installation:
Step 1 Secure the bottom cabinet

To prepare for the installation of the upper cooking cabinet
to the bottom cart kit, place the bottom cabinet on a flat,
level surface, preferably at ground level..

Lock the two (2) locking casters in place, to aid in making
the cabinet stationary.
Assembly Instruction
9
9