Publicité
Les langues disponibles
Les langues disponibles
Do not drill through the casement.
WinSafe WS 44
Drill the 2 outer holes
for the screws 4,8 x 50
and the middle hole
for the screw 4,8 x 22
with a Ø 3,5 mm drill.
When drilling do
not damage any
moving parts, seals
or glass panes.
Fit the casement plate
with 2 countersunk
screws 4,8 x 50
and 1 countersunk
screw 4,8 x 22 or the
shortened screw Ø 4,8.
Avoid overtighting of
the screws.
Insert the covering
caps on the casement
plate and into the
screw holes.
Caution: The caps
can no longer be
removed without
damage!
English | 19
Publicité
