Climatic Classes; Installation; Site - Schneider SCB250V2 Serie Mode D'emploi

10. Do not put hot liquids or hot foodstuff into the appliance.
11. The air vents of the appliance or its built-in structure (if the appliance is
suitable for being built-in) must be completely open, unblocked and free of any
kind of dirt.

2. Climatic classes

Look at chap. T
ECHNICAL
class of your appliance. Your appliance can be operated in rooms with
relevant room temperatures as named below.
CLIMATIC CLASS
SN
N
ST
T

3. Installation

3.1 Site

1. Completely remove the transport-protection (adhesive tape) of the accessories.
Be very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
3. Install the appliance in a dry and well-ventilated place.
4. Protect the appliance from direct sunlight.
5. The doors must open completely and without hindrance.
6. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
7. Connect the appliance to the mains properly.
8. The nameplate is situated inside the appliance or at the back.
D for information about the climatic
ATA
AMBIENT TEMPERATURE
+10 C
0 0
→+32
+16 C inner home temperature
0 0
→+32
+16 C inner home temperature
0 0
→+38
+16 C inner home temperature
0 0
→+43
e.g. unheated cellar
24