ECOVACS ROBOTICS DEEBOT N78 Mode D'emploi page 11

3
Power ON
Turn the robot's Bottom Power Switch to the
ON position. "I"=power ON; "O"=power OFF.
DEEBOT is powered ON when the AUTO
Mode Button glows a continuous BLUE.
When DEEBOT is not cleaning, it is
*
suggested to keep it powered ON and
charging instead of powered OFF.
4 Charge DEEBOT
Place DEEBOT on the Charging Dock
making sure the Charging Contacts on
DEEBOT and the Charging Dock Pins make
a connection.
Charge DEEBOT for at least 4 hours before
first use.
Make sure to turn the robot's Bottom
*
Power Switch to the ON position before
charging. ("I"=power ON; "O"=power OFF.
The robot's default setting is "O".) DEEBOT
is powered ON when the AUTO Mode
*
Button glows a continuous BLUE.
AUTO Mode Button blinks when DEEBOT
*
is charging. AUTO Mode Button stops
glowing when DEEBOT is fully charged.
3. Operating and Programming
9
EN