Auxiliary Menu Operation - Warn Zeon Platinum Guide D'utilisation

Next, are condensed procedures for winching
operation. You must read the Basic Guide to
Winching Techniques manual for complete
procedure instructions.
Stretching Winch Rope
Tensioning the winch rope is critical to ensure
a long product life. Tensioning the winch rope will
prevent outer layers of winch rope from pinching
and deforming the inner layers.
1. Read your Basic Guide to Winching Techniques
for Stretching Winch Rope instructions.
Rigging
1. Thoroughly read The Basic Guide to Winching
Techniques for complete Rigging Instructions.
2. Select Winching function.
3. Activate winch.
4. Disengage Clutch.
NOTE: The clutch will not disengage if the winch
rope is under tension.
FIRST TIME OPERATING INSTRUCTIONS
5. Confirm clutch (disengage /freespool) status.
6. Freespool winch rope to anchor point and secure.
Pulling
1. Thoroughly read The Basic Guide to Winching
Techniques for complete Pulling Instructions.
2. Power-in to start winching.
3. Secure vehicle.
4. Power-out to release tension in winch rope.
5. Disconnect winch rope from anchor.
6. Power-in winch rope for storage.
Never spool in rope hook against the fairlead.
WARNING
WARN INDUSTRIES
17
FIRST TIME OPERATING INSTRUCTIONS
Auxiliary Menu
Your WARN® Advanced Wireless Remote Control
can control up to two separate auxiliary systems*.
NOTICE *Auxiliary systems must be rated for 12v and
draw less than 16 amps.
Auxiliary connection adapter kits are necessary
in order to operate the auxiliary system. For
information on available kits, contact your WARN®
product dealer, WARN Customer Service or www.
warn.com.
Activate Auxiliary Operation Menu
1. From the Home Menu, navigate to the Auxiliary
Icon and press Select.
Auxiliaries can be switched on and off together
using the Dual Auxiliary Icon or individually by
using the Auxiliary 1 and Auxiliary 2 Icon and then
pressing Select.
Aux 1
Status
Dual
Aux
Icon
Aux 1
Icon
92821A3 92821A3
When an auxiliary is OFF the icons will show
outlined. When an auxiliary is ON, the icons will
appear solid.
Dual Auxiliary ON
Select
Auxiliary 1 ON
Aux 2
Status
Aux 2
Auxiliary 2 ON
Icon
WARN INDUSTRIES
18