Camera Controls - FujiFilm SX800 Manuel De Base

Installation and Connection
C

Camera Controls

amera Controls
Use the control panel on the back of the camera for live feed or camera control or adjusting camera settings. To display the
menus, press and hold the OK/MENU button for 3 seconds.
The following buttons are used to navigate the menus and control the camera:
Button
NEAR button
FAR button
WIDE button
TELE button
OK/MENU button
press and hold for 3 seconds to display the menus
BACK button
REC button
RESET button Note: Pressing and holding the button for 3 seconds displays a confi rmation dialog. Follow the on-screen instructions
to restore factory default settings.
FAR + NEAR buttons
Press and hold the RESET button for 3 seconds and then select OK to restore default settings when prompted. This
b
TIP
restores all settings except the IP address to their default values.
Menu navigation
Move the cursor left
Move the cursor right
Move the cursor down
Move the cursor up
Select the highlighted item/
Return to the previous display
—
Function
Focus further away from the camera
View or hide the focus area and zoom frames
Record footage to the SD memory card
Restore factory default settings
Press the two buttons at the same time to focus using one-push AF
EN-12
1 2 3 4 5 6 7 8
Control panel
Camera control
Focus closer to the camera
Zoom out
Zoom in
—