Installation And Connection; Installation; Screw Hole Specifi Cations - FujiFilm SX800 Manuel De Base

Installation

Use the screw holes on the base to secure the camera to a mount or other surface.
Attach the product securely to a surface that can safely bear the combined weight of the camera and associated hard-
ware. Do not mount the camera in unstable locations or locations subject to frequent vibration or attach it to weak
4
WARNING
materials such as drywall, ALC (autoclaved lightweight concrete), concrete blocks, or plywood. Injury could result
should the product fall from its mounting.
• Use ¼ ʺ, UNC 20 thread screws with a thread engagement length of 6.5 to 10 mm.
4
CAUTIONS
• Install the camera base down.
A handle can be attached using the screws on top of the camera.
• Use M4 screws with a thread engagement length of at least 4 mm and a protru-
sion of no more than 6 mm.
• Do not use the screw holes on top of the camera for any other purpose.
4
CAUTIONS
Screw Hole Specifi cations Screw Hole Specifi cations
The specifi cations for the screw holes on the top and base of the camera are as follows:
Top
Base

Installation and Connection

Type
M4
¼ ʺ, UNC 20 thread
Quantity
2 Pass through (threaded depth 4 mm)
15
EN-5
Handle
thickness
Depth Tightening torque
10 mm
4 mm
Max. 6 mm
80–100 N•cm
240–300 N•cm