Internet Protocol (Ip) Connections (Lan Onvif) - FujiFilm SX800 Manuel De Base

Internet Protocol (IP) Connections (LAN ONVIF)

When the camera is connected to a computer via Internet protocols (IP), a web browser can be used to adjust camera settings
and an ONVIF application to view the live feed and control the camera.
C C onnecting to a Computer onnecting to a Computer
SX800
1
Connect the supplied plug to the power cable and plug the cable into the
camera power connector.
4
Use only DC 12 V power.
CAUTION
b
Customers must supply their own power cable.
TIP
2
Use an Ethernet cable to connect the camera to a computer.
3
Select LAN ONVIF by setting DIP switch B to "ON" and DIP switches A , C
and D to "OFF".
4
Turn the camera on.
IP connection
EN-7
Installation and Connection
LAN
ONVIF
Computer
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8