Warranty - CHAFFOTEAUX ARIANEXT COMPACT 04 Notice Technique D'installation Et D'entretien

The installation and commissioning of the appliance must be perfor-
med by qualifi ed personnel in compliance with national installation
regulations and any requirements local authorities and institutions
responsible for public health.
ATTENTION
Near to the appliance, should not be placed any fl ammable object.
Make sure that the installation of all components of the system
complies with the regulations.

WARRANTY

The warranty is valid only if the installation of the appliance is carried
out by an authorized technician.
Damage due to the following causes will void the warranty:
Abnormal conditions of the installation:
• Internal unit positioned outside the house
• Internal unit positioned in a place subjected to bad weather or in
the presence of frost
• Appliance supplied with rainwater, water from wells or water
whose hardness is abnormal or not complying with current regula-
tions
• Installation in replacement of appliances that were defective from
the origin
In case of damages found on the appliance, the same shall be sent to
one of our Service Centers, following the contact with our technical
services.
The damages caused by improper installation, transport, packaging
and positioning after the collection of the appliance from the distribu-
tor will be borne by the installer.
The replacement of the components of the appliance shall not be
refunded, if it occurred in one of the following cases:
• Various damages caused by shock or electrical failures during han-
dling of the product, after it leaves the establishment of produc-
tion
• Damages caused by a leakage of water from the internal unit that
can be avoided by an immediate repair of the product by the user
• Damages caused by the application of overvoltage to the system
the warranty applies to the internal unit and external unit only if
both their hydraulic and electronic components are intact.
The warranty does not apply in cases where the installation is not
conform to the regulations and standards in force as well as state
of the art and, more particularly, in the case of:
• The installation of the safety group is not correct
• The installation of the security group is not compliant to the rules in
force or when is used a damaged security group
• Changes made to the safety group during maintenance activities
• Abnormal corrosion of the hydraulic components due to incorrect
connections (direct contact iron-copper)
• Defective electrical connections or connections not compliant to
the installation, improper grounding, cable cross section too low,
non-compliance with the indicated electrical connections scheme
• Damages due to the powering up of the system before the hydrau-
lic fi ll
64 The warranty does not apply in cases of damages due to an insuf-
fi cient maintenance, as:
• Abnormal corrosion of the heating bodies and safety groups
• Absence of maintenance of the safety group
• Metal frame subjected to the aggression of external agents
• Changes made to the original appliance without communications
to the manufacturer or the use of non-original spare parts
• Total absence of maintenance of the appliance
Marcatura CE
appliance complies with norms:
- 2004/108/EC - relating to Electromagnetic Compatibility
- 2006/95/EC - related to electrical safety (LVD)
Characteristics of the water supplied to the appliance
Ensure that the system is supplied with water having a maximum
hardness of 20 ° F.
For areas where the water is particularly hard, provide a water sof-
tener does not change in any way the warranty, if the component
is installed in a proper manner and is subject to regular checks and
maintenance.
In particular, the hardness of the water supplied to the appliance, must
never be less than 12 ° F.
In case of aggressive water fi lling (the pH should be kept between
6.6 and 8.5), ferruginous or hard, use treated water in order to pre-
vent scaling, corrosion and damages to the appliance. Please note that
even a small amount of impurities in the water may decrease the per-
formance of the installation.
The used fi lling water must absolutely be treated in case of installation
of large capacity (high volumes of water) or in case of frequent rep-
lenishments of water in order to maintain a constant level of liquid in
the installation. Where it is necessary to proceed with the cleaning of
the installation, fi ll the entire system with treated water.
Verify that the maximum pressure, at the level of the water supply,
does not exceed 5 bar. Otherwise, provide the installation with a
pressure reducer valve.
System compositions
ARIANEXT COMPACT system consists of:
- an internal unit FSP, 1 zone or 2-zone
- an external unit (heat pump air / water), 4, 6 or 8 kW
- a remote control device (Expert Control)
- an external temperature probe
For more information on available accessories, please refer to the Pro-
duct Catalogue.