Télécharger Imprimer la page

True Comfort cable chauffant Guide D'installation page 13

Publicité

Les langues disponibles

Les langues disponibles

Multiple-circuit installations
Should your installation require more than one circuit, you will need one thermostat, as well the
required number of expansion units or relays. For their connection, refer to the instruction guide
provided with the True Comfort thermosat, the expansion units or the relays. Identify the circuits
on the electrical panel. Complete and apply the warning label.
Keep installation and user guides
Please keep the thermostat instructions in a safe place for future reference.
System start-up
Curing period
Do not turn your system on immediately. The system can be operated only after the mortar or
self-leveling underlayment has completely cured. This waiting period is essential to ensure that
the mortar or self-leveling underlayment is properly set. Refer to your manufacturer's instructions
to verify the curing time for the product you are using (generally 28 days).
Use of rugs
Do not lay a rug on a floor equipped with a heating system. The heat that would get trapped
could alter your rug or flooring. The use of a bath mat is acceptable, as long as it is taken off the
floor once the bath period is over.
For the same reason, do not lay a piece of furniture under which air cannot freely circulate on
flooring under which there is a floor heating system.
Repair
Should the floor covering need repair, contact True Comfort customer service at 1 877 800-TRUE
(8783). Always turn off the power supply to the heating cable before removing the piece of flooring
that needs to be repaired.
13

Publicité

loading