DoorBird D10 Série Manuel D'installation page 2

INSTALLATION MANUAL
You can always find the most up-to-date version of the installation manual
on www.doorbird.com/support
COMPONENTS
Contents
∙ 1x DoorBird Video Door Station
∙ 1x Power supply unit (mains adaptor) with four country-specific adaptors
∙ 1x Cable with plug for the power supply (black, red)
∙ 1x Cable with plug and RJ45 jack for the network cable (white-orange,
orange, white-green, green)
∙ 1x Cable with plug for the network cable (white-orange, orange,
white-green, green), alternatively to the cable with plug and RJ45 jack
∙ 1x Cable with plug for the electric door opener (purple, purple)
∙ 1x Cable with plug for the electric door chime (blue, blue)
∙ 1x Cable with plug for the door-opening button (yellow, yellow)
∙ Several crimp connectors
∙ 4x Phillips countersunk head screws for the wall mounting plate, long
∙ 4x Phillips countersunk head screws for the wall mounting plate, short
∙ 4x Dowels
∙ 1x Safety screw
∙ 1x Screwing-tool for the safety screw
∙ 1x Wall mounting plate with sealing ring (installation on wall surface)
∙ 1x Installation manual
∙ 1x Quick start guide
2
Video door station
front
Night vision
1
HDTV video
2
Loudspeaker
3
Motion sensor
4
Stainless-Steel
5
Button
Microphone
6
Light sensor
7
1) Night vision
Extra bright infra-red LEDs, effective
during the hours of darkness
(infra-red light invisible to the
human eye, 850 nm)
2) HDTV video
Ultra wide-angle hemispheric
lens, 180°
3) Loudspeaker
Large-sized and speech enhanced
broadband speaker
4) Motion sensor
180° Infrared motion sensor
for alarms
VIDEOS
Need help with the installation? Be sure to watch our installation videos
which can be found on http://www.doorbird.com/support
Each individual step of the installation is clearly documented in the videos.
back
Locking positions
8
Connection terminal
9
Screw opening
10
5) Stainless-Steel Button
With illuminated LED ring (at night),
also acts as Diagnostic-LED
6) Microphone
With active noise cancellation
7) Light sensor
For the night-vision mode
8) Locking positions
For the mounting plate
9) Connection terminal
For the power supply,
door chime, etc.
10) Screw opening
For the safety screw
3