Yamaha HTR-6150 Mode D'emploi page 76

SET MENU
4
Repeat steps 1 through 3 to rename each
input source.
Press 8 ENTER to exit from "INPUT
5
RENAME".
■ Volume trim
C)VOLUME TRIM
Use this feature to adjust the output volume of each
source. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: CD, MD/CD-R, TUNER, DVD,
DTV/CBL, V-AUX, DVR, DOCK,
MULTI CH, XM, SIRIUS
Control range: –6.0 to +6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB
2 INPUT MENU
C)VOLUME TRIM
DVD
p
[ ]/[ ]:Adjust
[RETURN]:Exit
Note
You can only adjust the value for DOCK when your iPod is
stationed in the Yamaha Universal Dock connected to this unit.
■ Decoder mode
2 INPUT MENU
D)DECODER MODE
.
>AUTO
CD
DVD
DTV/CBL ;;;;AUTO
[ ]/[ ]:Up/Down
p
[ ]/[ ]:Select
Decoder select mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
• Select "AUTO" if you want this unit to automatically
detect the type of input signals and select the
appropriate decoder mode.
• Select "LAST" if you want this unit to automatically
select the last decoder mode used the connected input
source.
72
En
DVD
;;;;;0.0dB
[
D)DECODER MODE
LAST
;;;;AUTO
;;;;AUTO
[
DTS decoder prioritize setting
Choices: AUTO, DTS
• Select "AUTO" if you want this unit to automatically
detect input signal types and select the appropriate
input mode.
• Select "DTS" when you play back a DTS-CD.
■ Multi channel input setup
E)MULTI CH SET
2 INPUT MENU
E)MULTI CH SET
BGV;;;;;;;;;LAST
INPUT CH;;;;;6CH
p
[ ]/[ ]:Select
Background Video BGV
Use this feature to select the video source played in the
background of the sources input at the MULTI CH INPUT
jacks.
Choices: DVD, DTV/CBL, V-AUX, DVR, LAST
y
Select "LAST" to set this unit to automatically select the last
selected video source as the background video source.
Input channels INPUT CH
Use this setting to select the number of channels input
from an external decoder (see page 19).
Choices: 6CH, 8CH
2 INPUT MENU
E)MULTI CH SET
BGV;;;;;;;;;LAST
INPUT CH;;;;;8CH
FRONT;;;;;;;;DVD
p [
[ ]/[ ]:Select
If the connected component outputs discrete
6-channel audio signals.
Select "6CH".
If the connected component outputs discrete
8-channel audio signals.
Select "8CH". Also set "FRONT" (see below) to the
analog audio jacks at which the front left and right
channel signals output from the connected component
are input.
Front left and right channels input jack FRONT
If you selected "8CH" in "INPUT CH", you can select the
analog audio jacks at which the front left and right channel
signals output from the connected external decoder is
input.
Choices: DVD, DTV/CBL, DVR, V-AUX
Note
"FRONT" parameter appears only when you set "INPUT CH" to
"8CH".
[