Yamaha HTR-6150 Mode D'emploi page 71

Crossover CROSSOVER
Use this feature to select the crossover frequency of all the
speakers set to "SML" (or "SMALL") in "SPEAKER
SET" (see page 65). All frequencies below the selected
frequency will be sent to the subwoofer or front speakers
depending on the setting of "LFE/BASS OUT" in
"SPEAKER SET" (see page 65).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
1 SOUND MENU
A)SPEAKER SET
CROSSOVER
FREQ;;;80Hz
Subwoofer phase SUBWOOFER PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
1 SOUND MENU
A)SPEAKER SET
SUBWOOFER PHASE
>NORMAL
• Select "NORMAL" if you do not want to reverse the
phase of your subwoofer.
• Select "REVERSE" to reverse the phase of your
subwoofer.
REVERSE
■ Speaker level
B)SP LEVEL
Use this feature to manually adjust the output level of each
speaker.
Control range: –10 to +10 dB
Control step: 1 dB
Initial setting: 0 dB
1 SOUND MENU
B)SP LEVEL 1/2
- __________ +
. FR.L
FR.R
CNTR
SWFR
SP LEVEL
FR.L
Front left speaker
FR.R
Front right speaker
CNTR
Center speaker
SWFR
Subwoofer
SUR.L
Surround left speaker
SUR.R
Surround right speaker
SBL
Surround back left speaker
SBR
Surround back right speaker
Notes
• The available speaker channels differ depending on the setting
of the speakers.
• Instead of "SBL" and "SBR", "SUR.B" is displayed if "SUR.B
L/R SP" is set to either "SMLx1" or "LRGx1" (see page 66).
SET MENU
1 SOUND MENU
B)SP LEVEL 2/2
- __________ +
.SUR.L
SUR.R
SBL
SBR
Adjusted speaker
67
En