Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.2.1.
Smoke outlet
Your
stove
is
connections: a top or a rear connection.
Upon supply, the top and rear exhausts
have been left open. Depending on the
position chosen, one opening can be
covered with the blanking plate supplied
(2); the other one can be equipped
with the connection collar supplied (1)
(see picture). Use the fixings supplied
and be sure to tightly seal the connection
collar and the blanking plate to the stove
by means of the kit or paste supplied.
In order to make the connection easier,
the top plate (3) may simply be removed
from the stove and replaced afterwards.
The blanking plate (2) is designed such
that, in case of rear mounting, it seems
to be an integral part of the top plate; in
case of top mounting, it can cover the
rear opening without disturbing the outer
appearance.
Assembling the "cold handle"
3.2.2.
Assemble as indicated on the sketch.
3.3.
Finishing
When the stove is placed in the final position and hermetically connected to the
chimney, you can replace all of the loose parts.
Your stove is now ready for use.
Attention: never light a fire with the inner plates or refractory stones removed.
3.4.
Packaging materials
Packaging materials should be disposed of in a responsible way and in accordance with
governmental regulations.
DRU 64CB - DRU 78CB
suitable
for
two
30
03.27616.000
Publicité
Table des Matières
