Reloop MIXAGE Interface Edition MK2 Mode D'emploi page 30

T9
T10
T11
T12
T13
T14
T15
T16
T17
T18
T19
T20
T21
T22
T23
T24
T25
30
Fx Select Button
By pressing the button it is possible to scroll
through the effects.
Fx dry/Wet+ dial
Herewith it is possible to quickly change the
effect's intensity.
amount (Fx parameter 1) dial
In Effect Mode the parameters can be adjusted
herewith.
NOtE!
In traktor LE only the 1st parameter works in
Chained Effect Mode.
Fx On taste
Activates the FX section corresponding to the
deck.
Search Mode Button
Allows quick scrolling through a loaded track.
Scratch Mode Button
Activates the jog wheel's scratch function and
the pitch bend function at the edge of the jog
wheel.
Jog Wheel
Herewith various functions can be controlled.
Sync Button
The current deck's pitch will be synchronized
to the master deck.
Cup Button
As long as this button is being pressed the
deck jumps to the last set cue point and stops.
When releasing the button playback will start.
Cue Button
Herewith the cue point will be triggered and
played for as long as the button is being held.
play/pause Button
Starts and pauses the track's playback respec-
tively.
trax Encoder (tracklist Navigation)
- By turning the encoder it is possible to scroll
through the track list.
- By pressing the encoder browser view will be
maximized.
track Load Button
Assigns the selected track to the deck.
High dial
Regulates the high EQ.
Mid dial
Regulates the mid EQ.
Low dial
Regulates the bass EQ.
Cue Buttons
By pressing one of the Cue Buttons the mo-
nitoring function for the selected deck will be
activated.
Master deck assignment
The current deck becomes the
master deck.
pan dial
Herewith it is possible to adjust
the volume division between the
left and right channel. The zero
position corresponds to an equal
level on both channels.
Filter
Regulates the filter effect for the
activated deck. In zero position
the filter will automatically be
deactivated.
keylock Button
(De-)activates Keylock.
Cue 1 Button
Sets and triggers the 1st cue
point.
Cue 2 Button
Sets and triggers the 2nd cue
point.
Cue 3 Button
Sets and triggers the 3rd cue
point.
Cue 4 Button
Sets and triggers the 4th cue
point.
trax Encoder (Folder Navigation)
- By turning the encoder it is
possible to navigate through the
folders.
Load Button
Open folder [L],
close folder [R]
Cue Button
Track Pre-Listen Play [L] / Stop [R]