Reloop MIXAGE Interface Edition MK2 Mode D'emploi page 21

• The inside of the device does not contain any parts which require maintenance, with the excep-
tion of wear parts that can be exchanged from the outside. Only qualified staff must carry out
maintenance, otherwise warranty does not apply!
• The fuse must exclusively be exchanged against fuses of the same class, with the same trigger
features and nominal current rating.
• Only use cables that comply with regulations. Observe that all jacks and bushes are tightened
and correctly hooked up. Refer to your dealer if you have any questions.
• Disconnect the device from the computer when not in use and before cleaning!
• Position the device on a horizontal and stable low-flame base.
• Avoid any concussions or violent impacts when installing or operating the device.
• When selecting the location of installation make sure that the device is not exposed to exces-
sive heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your
own safety and that of others!
• Do not rest any containers filled with liquid that could easily spill onto the device or in its im-
mediate vicinity. If, however, fluids should access the inside of the device, immediately discon-
nect the USB cable. Have the device checked by a qualified service technician before re-use.
Damage caused by fluids inside the device is excluded from the warranty.
• Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5°
C) conditions. Keep the device away from direct exposure to the sun and heat sources such as
radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or
vents. Always ensure sufficient ventilation.
• The device must not be operated after being taken from a cold environment into a warm
environment. The condensation caused hereby may destroy your device. Do not switch on or
operate the device until it has reached ambient temperature!
• Controls and switches should never be treated with spray-on cleaning agents and lubricants.
This device should only be cleaned with a damp cloth. Never use solvents or cleaning fluids
with a petroleum base for cleaning.
• When relocating, the device should be transported in its original packaging.
• Devices supplied by voltage should not be left in the hands of children. Please exercise particu-
lar care when in the presence of children.
• At commercial facilities the regulations for the prevention of accidents as stipulated by the
organization of professional associations must be observed.
• At schools, training facilities, hobby and self-help workshops the operation of the device must
be monitored with responsibility by trained staff.
• Keep this operation manual in a safe place for later reference in the event of questions or problems.
appLICatION IN aCCOrdaNCE WItH rEGuLatIONS
• This device is a professional DJ MIDI controller with integrated 4 channel soundcard that can
control software. The device should be connected via USB cable to a computer.
• This product is designed exclusively for indoor application.
• If the device is used for any other purposes than those described in the operation manual,
damage can be caused to the product, leading to exclusion of warranty rights. Moreover, any
other application that does not comply with the specified purpose harbours risks such as
short circuit, fire, electrical shock, etc.
• The serial number determined by the manufacturer must never be removed to uphold the
warranty rights.
MaINtENaNCE
• Check the technical safety of the device regularly for damage to the casing, as well as for
wearout of wear parts such as rotary knobs and sliding faders.
• If it is to be assumed that a safe operation is no longer feasible then the device must be dis-
connected and secured against accidental use. Always disconnect the USB cable.
• It must be assumed that a safe operation is no longer feasible if the device bears visible de-
fects, if the device no longer functions, following longer storage under unfavourable conditions
or after major transport stress.
21