Cleaning Of The Fuel Gas Draught Components - Wamsler WP 01 Instructions D'installation Et De Service

WP01_1_2010_de_en_fr_it_V10.doc
Technical expertise is needed to perform servicing, which is why we recommend the
performance of service by a specialised company.
Operation of the stoves is allowed only with all properly assembled lining
elements, since the approval of the stoves as well as warranty claims would
otherwise expire, and there is risk of coming into contact with voltage lines or hot
Disconnect the power plug before beginning service and reinsert the plug
for a trial run only once all lining elements are properly reassembled.
7.1

Cleaning of the fuel gas draught components

Removal of the upper lining
Unscrew the cover plate
Use of cleaning brushes from the accessories and removal of ash coatings
Assemble densely in reverse order
Note / Warning:
Fire, shortcircuit and risk to life!
parts.
43 / 96