Publicité
Les langues disponibles
Les langues disponibles
3
OFF
Fig. 3.1
OFF
OK
NOT TURN
Fig. 3.2
14
OVEN BURNER
It carries out normal "oven cooking".
The gas flow to the burner is regulated by a thermostat which allow to maintain the
oven temperature constant.
The control of the temperature is assured by a thermostatic probe positioned inside
the oven.
The probe must be always kept in its housing, in a clean condition, as an incorrect posi-
tion or encrustment may cause an alteration in the control of the temperature.
OVEN THERMOSTAT
The numbers printed on the control knob (fig. 3.1) indicate the increasing oven tem-
perature value (see temperature table near the control knob - fig. 3.1).
Left column of the temperature table refers to oven burner used in combination with
the fan motor while right column refers to oven burner used in the normal convection
mode (without fan motor).
To regulate the temperature, set the chosen number onto the control panel indicator.
The position
OVEN LIGHT AND FAN MOTOR
The oven light and the fan motor are controlled by a switch knob on the control panel
525
530
(fig. 3.2). To light up the oven lamp turn the knob anti-clockwise to
575
To operate the fan motor turn the knob clockwise to
585
In this setting also the oven lamp is lighted.
WARNING: The switch knob can be turned only clockwise from
position and anti-clockwise from
The switch knob DO NOT TURN from
FORCE.
IMPORTANT NOTE: The fan motor can be used in combination only with the oven
burner. A safety device switches off the fan motor when the gas oven/broil control knob
is turned on
OK
BROIL
serves only to turn on the broil burner.
OFF
to
BROIL
position.
LIGHT
LIGHT & FAN
OFF
LIGHT
position.
LIGHT & FAN
LIGHT
to
position. DO NOT
position.
position.
LIGHT & FAN
to
Publicité
