Maintenance; Maintenance Interval - GF Piping Systems EA15 Mode D'emploi

Instruction manual
11

Maintenance

Lack of product quality through use of spare parts not provided by GF Piping Systems!
Danger of injury.

Only use the listed spare parts, see Chapter 12 "Spare parts list".
 Set maintenance intervals as per the conditions of use (e. g. actuating cycles, fluid,
ambient temperature).
 As part of the regular system inspection, carry out the following maintenance activities:
Maintenance
interval
Regularly
Regularly
Regularly
For questions regarding maintenance of the product, please contact your national GF Piping
Systems representative.
Maintenance task
 Check that the cover of the emergency manual override is correctly
installed. If necessary, install cover.
 Check that the housing cover of the actuator is secured with 4
screws.
If necessary, tighten screws.
 Check if grating noises are coming from the actuator.
Replace actuator, see assembly instructions for building valve with
actuator.
 Check that position indicator matches signal of the control.
 If necessary, adjust the end positions, see Chapter 9.2 "Adjusting
end positions".
Maintenance
57