Safety And Responsibility; Transport And Storage - GF Piping Systems EA15 Mode D'emploi

Instruction manual
3

Safety and responsibility

 Only use the product for the intended purpose, see Intended Use.
 Do not use the product if it is damaged or faulty. Sort out the product immediately or
obtain service if damaged.
 Product and accessories only to be operated by persons, who have the necessary training,
knowledge or experience.
The following target groups are addressed in this instruction manual:
 Operators: Operators are instructed in the operation of the actuator and observe the
safety guidelines.
 Service staff: The service staff have been professionally trained and carry out
maintenance work.
 Electrically qualified person: Persons who work on the electrical equipment must be
technically trained and qualified.
 Regularly instruct personnel on all questions regarding the local regulations applying to
occupational safety and environmental protection, especially for pressurized pipelines.
 Make sure that personnel know, understand and follow the instruction manual and the
instructions contained therein.
 Observe the instruction manual for the manual valve. They are an integral component of
this manual.
 Take precautions against electrostatic hazards.
4

Transport and storage

 Protect the product against external forces during transport (impacts, knocks, vibrations,
etc.).
 Transport and/or store the product in its unopened original packaging.
 Protect the product from dust, dirt, moisture as well as heat and ultraviolet radiation.
 Ensure that the product is not damaged either by mechanical or thermal influences.
 Before assembly, check the product for damage during transport.
Safety and responsibility
37