Instruction manual
1
Intended use
The electric actuator EA 15 is designed for assembly on a valve and for connection to a
system controller.
The electric actuator EA 15 is intended to activate valves with rotating movements up to 180°
(e. g. ball valves and butterfly valves).
The product is not intended for any types of use other than those described here. Non-
observance of the instructions contained in this manual will void the manufacturer's warranty
for the products mentioned above.
2
About this document
This document contains all the information necessary for installation, operation and
maintenance of the product.
2.1
Warnings
This instruction manual contains warnings that indicate a risk of death, injury, or material
damage. Always read and observe to these warnings!
Risk of serious physical injury!
Non-observance will lead to a possible risk of fatal or serious physical injury!
Risk of minor physical injury!
Non-observance will lead to a risk of physical injury!
ATTENTION
Risk of damage to property!
Non-observance will lead to a risk of damage to property (loss of time, loss of data, machine
damage, etc.)!
Intended use
35